Auswahl des Edelstahl Membranventiles
Choose of Stainless Steel Diaphragm Valve
Choix vannes à membrane
Scelta della Valvola a membrana
back to 2-2 way Valve manual back to the pneumatic Valve back to the maunal Valve

Allgemeines Note Géneralités Note
Durchfluss-Charakteristik Flow Caracteristics Caractéristiques Caratteristiche di flusso
Druckverlust-Diagramm Pressure diagram Caractéristiques Caratteristiche
Rohranschlussdimensionen Tube connecting dimensions Dimension de Tube Diametri dei Tubi

Durchfluss-Charakteristik Flow Caracteristics Caractéristiques Caratteristiche di flusso
kv 100 - Readings
ISO DIN BS-OD SMS kv 100 Cv
( 4200 ) ( 11850 ) ( Standard ) ( 3008 )
DN 04 DN 1/4" 36 2.6
DN 06 DN 06 36 3.2
DN 08 DN 08 41 4.7
DN 10 DN 10 72 5.5
DN 08 DN 1/2" 72 5.5
DN 10 DN 15 DN 15 120 8.7
DN 15 DN 20 DN 3/4" DN 20 137 9.5
DN 20 DN 25 DN 1" DN 25 238 17.2
DN 25 DN 32 DN 32 354 24.8
DN 32 DN 40 DN 1-1/2" DN 40 460 33.3
DN 40 DN 50 DN 2" DN 50 685 49.6
DN 50 DN 2-1/2" 992 69.4
kv 100 - Readings ( I/min.Ap=1 ) bar
Entry pressure P1:3 bar / Diaphragm
Table by BBS-Systems / Copyright © by BBS-Systems


Druckverlust-Diagramm Pressure Diagram Caractéristiques Caratteristiche
Pressure Diagram / Diagram by BBS-Systems / Copyright by BBS-Systems
1bar= 0.1 N/mm2 ~ 1kp / cm2 ~ 14,5psi

ISO ( 4200 ) DIN ( 11850 ) BS-OD ( Standard ) SMS ( 3008 )
Dimensionsbereich DN 08 - DN 150 DN 04 - DN 150 DN 1/4 " - DN 6 " DN 06 - DN 150
Dimension range
Dimension structure
Dimensione
Table by BBS-Systems / Copyright © by BBS-Systems

Max. Betriebdruck 10 Bar beidseitig bis DN 80 ( spezielle Druckauslegung auf Anfrage )
Max. Working Pressure 10 Bar double sided until DN 80 ( special pressure Valve upon request )
Pression de service max. 10 Bar pression de service des 2 côtes jusque à DN 80
Pressione di servizio mass. 10 Bar pressioni su entrambi i lati fino DN 80
Table by BBS-Systems / Copyright © by BBS-Systems

Max. Temperatur EPDM 135°C/ 150°C kurzfristig ( 45 min ) // FEP 140°C // TFM 150°C
Max. Temperature EPDM 135°C/ 150°C short Time ( 45 min ) // FEP 140°C // TFM 150°C
Max. Temperature EPDM 135°C/ 150°C short Time ( 45 min ) // FEP 140°C // TFM 150°C
Max. Temperatura EPDM 135°C/ 150°C short Time ( 45 min ) // FEP 140°C // TFM 150°C
Table by BBS-Systems
Copyright © by BBS-Systems