| back to the Product Main Menu | back to the Specification Menu |
| Piping Dimensions | Tolerances | Connections | Joints |  |
| Material | Certificates | Quality | Pressure | |
| Temperature | Resistance | Approvals | Documentation |
| back to the Product Main Menu | back to the Specification Menu |
| Piping Dimensions | Tolerances | Connections | Joints | |
| Material | Certificates | Quality | Pressure | |
| Temperature | Resistance | Approvals | Documentation |
All Products and support conditions of BBS-Systems are according to the following specifications. These Specifications are valid unless modifications are specifically accepted in writing and signed by an authorised representative of BBS-Systems.
Directives
- Directive 97/23/EC
of the European Parliament and of the Council of 29. May 1997 on the approximation of the laws of the Member States concerning pressure equipment
- Directive 87/404/EC
of the European Parliament and of the Council of the laws of the Member States concerning pressure Vessels
- Directive 97/37/EC
of the European Parliament and of the Council of 29. May 1997 on the approximation of the laws of the Member States concerning Machine guidelines.
Piping Dimensions:
- DIN DN 04 - DIN DN 10 acc. to DIN 2634 Raw 0
- ISO DN 08 – ISO DN 20 acc. to ISO 4200 Raw A
- ISO DN 25 – ISO DN 150 acc. to ISO DN 4200 Raw B
- ISO DN 200 and larger according to ISO 4200 Raw C
- Imperial dimensions acc. to ASME BPE 1997 + BPE a 2000. ANSI 3610 and ANSI B16.5
- SMS Sizes acc. to SMS 3008
Tolerances :
- Pipes acc. to DIN 17457 D4/T4 ( D3/T3) and DIN 17458 D4/T4 (D3/T3)
- Fittings acc. to ISO 5251, ASME BPE 1997 + BPE a 2000
- Connections and Forms acc. to DIN 7184 Part 1 and OENORM
- A 6065 part 3 i.e. DIN ISO 2768 and DIN ISO 1101, ASME BPE 1997 + BPE a 2000
- Glasses acc. to DIN 7184 / ISO/R 1101 acc. DIN 7080
- Seals acc. to DIN 3771
- Hose acc. to BBS-Hose Specifications
Connections:
- Prepared for Orbital Welding in tangent length of 16 mm or 18 mm for DIN, ISO and BSOD Sizes and to ASME BPE 1997 + BPE a 2000
- Valve actuators acc. to George Fischer specification.
Joints:
- Threads acc. to DIN 13 part 1-27 and BBS-Systems Norm Piping components and ASME BPE 1997 + BPE a 2000
- Clamps acc. to ANSI Standard, ASME BPE 1997 + BPS a 2000
- Welding acc. to EN 288
- Screws acc. to DIN 267 Part 1
Material:
- Product contacted 1.4435 acc. to BN 2 ( 316L ) and ASME BPE 1997 + BPE a 2000 / DIN 17440 / EN 10222-5 Steel forgings for pressure purposes / EN 10028-7 Flat products made of steels for pressure purposes / EN 10272 Stainless Steel bars for pressure purposes
- Non Product contacted 1.4571, 1.4301 or equal i.e. technical Documentation for Design and DIN 17440 / EN 10222-5 Steel forgings for pressure purposes / EN 10028-7 Flat products made of steels for pressure purposes / EN 10272 Stainless Steel bars for pressure purposes
- Seals EPDM, FEP-Silicone ( FDA conform )
- Diaphragms EPDM / FDA conform ), PTFE / EPDM 2 piece construction ( FDA conform )
- Hose - Silicone ( reinforced or transparent ) FDA conform
- Glass - Borosilicate 3.3 acc. to DIN ISO 3585
- Valve actuators - PP mod. reinforced
Certificates:
- Product contacted acc. to EN 10204/3.1B ( AD-W2 )
- Non Product contacted acc. to EN 10204 / 2.1
- Seals acc. to EN 10204/2.1 and Certificate of Conformity acc. to FDA 177.2600 i.e. USP
- Diaphragms acc. to EN 10204/2.1 and Certificate of Conformity acc. to FDA 177.2600
- Standard Hose acc. to EN 10204.2.1 and Certificate of Conformity acc. to FDA 177.2600 and USP 24 Class IV
- Glass acc. to EN 10204/2.1 and BPE 177.2600 specification
- Flow conformity upon request ( Standard BPE Regulations )
- Pressure conformity upon request.
Quality:
- Product Contacted surface Ra < 0,6 µm electropolished acc. BN 94
- Non Product Contacted surface Ra > 0,8µm electropolished acc. BN 94
- Weld seam unpolished, pickled and electropolished acc. BN 94
- Product contacted Parts are marked with Material and Trade mark.
Pressure:
- acc. to specifically BBS-Systems Documentations / pressure test to BS 6755 Pt.1
Temperature: ( Temperature at Ambient Pressure )
- Seals max. + 140°C
- Hose max. + 160°C
- Glass max. + 300°C
Resistance:
- Material resistance acc. to Raw material supplier
Approvals:
- are not an integral Part of any delivery
Quality control:
- Approvals acc. To Raw material supplier – not included inthe standard delivery
- Controll acc. to AQL 0.65 Norm Niveau II sampling plan
Documentation
- Documents such as (Drawings, Certificates, Manuals, Users Guide) are not included in the price and need to be separately ordered in written with all needed Norms and Guidelines. User Manuals can be down loaded here !
- Temperature and Pressure ratings are not committal due to combination of chemical treatment and time ratings.
- The technical dates are not binding. They are not warranted characteristics and are subject to change. Please consult our General supply Conditions.
| update |